(--) S3V: chipset driver: S3_VIRGE
(--) S3V: videoram: 4096K
(--) S3V: Ramdactype: s3_trio64
(--) S3V: Ramdac speed: 170 MHz
(--) S3V: using Trio 32/64 programmable clock (MCLK 45.000 MHz)
(--) S3V: Maximum allowed dot-clock: 170.000 MHz
(**) S3V: mode "640x480": mode clock 25.175
(--) S3V: using 6 bits per RGB value
(**) S3V: virtual resolution set to 640x480
(--) S3V: local bus LAW is 0xF8xxxxx
(--) S3V: using a banksize of 2560k, line width of 640
Fatal Server Error:
caught signal 11. Server aborting
-X11TransSocketUnixConnect: can't connect: errno = 111
xinit: connection refused (errno 111): unable to connect to X server
xinit: No such process (errno 3): server error
so far, I set the resolution to default 8 bits 640x480.
I am using a DAYTEK DT-1501BAI/MPR monitor with:
Horizontal
Frequency: 31kHz-64kHz
Blanking Time: min 3.4usec
resolution: max 1280 dots
Vertical
Frequency: 50-90Hz
Blanking Time: min 0.45msec
resolution: max 1024 lines
Any hints or suggestion would be greatly appreciated.
Thanks