VanLUG Email Archive
Alan Zisman (azisman@home.com)
Sun, 21 Mar 1999 16:57:15 -0800
Help!!!
I'm trying to configure a Linux (RedHat 5.2) machine to connect to my Win98
system, which is acting as a gateway for my @home account. (Yes I know I should
really do it the other way around! But for various reasons, I can't or won't).
I can ping the Win98 machine, at both network cards-- 192.168.0.10 for the
internal network, and the 24.113.1.xxx for the card connected to @home... but I
can't ping anything out on the Internet.
What's the proper route command for the Linux client? (Yes, I've checked the
MAN page!)
Typing 'route' & 'ifconfig' give the following output:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 9 eth0
24.113.0.0 gateway 255.255.255.0 UG 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 1 lo
default gateway 0.0.0.0 UG 0 0 8 eth0
'ifconfig' reports:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:202 errors:0 dropped:0 overruns:0 frame:0
TX packets:202 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
eth0 Link encap:Ethernet HWaddr 00:40:95:1A:6D:06
inet addr:192.168.0.4 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1434 errors:0 dropped:0 overruns:0 frame:0
TX packets:1131 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
Interrupt:10 Base address:0x300
Thanks in advance for all help!
(Please reply to me personally as well as to the mailing list).
-- AZ
======================================================
* Alan's home page: http://members.home.net/azisman/
* Win95 Frequently Asked Questions: http://members.home.net/azisman/faq95.htm
This archive was generated by hypermail 2.0b3 on Mon 22 Mar 1999 - 11:20:34 PST