VanLUG Email Archive
Sal (sal@technologist.com)
Mon, 16 Aug 1999 10:31:27 +0000
Thanks to everyone who helped me figuring out more than one NIC now the
prob is that one of the cards (eth1) is not showing packets transmitting
or receiving (Rx and Tx of eth1 are both 0). should i worry ? Here is
the ifconfig output. what i am doing wrong. is it a conflict? I need to
have eth1 card working. i can ping but i dont know if that is enough for
ip-masq. eth2 is actually a pic card and i canna move this drive to a
486 box after everything is working...
Thanks in advance
:
eth0 Link encap:Ethernet HWaddr 00:00:1C:1C:72:3B
inet addr:24.113.142.227 Bcast:24.113.143.255
Mask:255.255.252.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:450230 errors:0 dropped:0 overruns:0 frame:0
TX packets:137 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:4 Base address:0x320
eth1 Link encap:Ethernet HWaddr 00:A0:C9:19:C3:FF
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:11 Base address:0x200
eth2 Link encap:Ethernet HWaddr 00:E0:29:36:ED:01
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:450070 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:5 Base address:0xd000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
This archive was generated by hypermail 2.0b3 on Thu 09 Sep 1999 - 06:40:34